HIDDEN-PV advances transparent and indoor photovoltaic technologies

The project achieves visually transparent devices with record voltages and improves performance under indoor illumination.

Generic image of a transparent photovoltaic cell with visible circuitry under indoor lighting.
AI

Generic image of a transparent photovoltaic cell with visible circuitry under indoor lighting.

The HIDDEN-PV project, led by IREC, has presented significant advances in photovoltaic technologies for integrated applications, including visually transparent devices and improved performance under indoor illumination.

After three years of research, the HIDDEN-PV project has delivered key advances in photovoltaic technologies for integrated applications. These include visually transparent devices with record open-circuit voltages, a two-fold improvement in performance under indoor illumination, and the transfer of high-performing cells to flexible polymeric substrates. These results bring photovoltaic technologies closer to applications where conventional solar panels face limitations related to illumination conditions, visual impact, or integration.
The project focused on photovoltaic devices based on earth-abundant, low-toxicity materials. It advanced Sb(S,Se)I-based technologies for indoor and diffuse illumination and (Zn,Mg)(O,S,Se)-based technologies for transparent photovoltaics. In parallel, ultra-thin device architectures, flexible substrates, and eco-efficient fabrication approaches were investigated to improve the sustainability and integration potential of the resulting devices.
This work generated new knowledge on emerging photovoltaic materials and device concepts, while also progressing towards lighter, more flexible technologies and more scalable manufacturing processes, including printing and roll-to-roll-compatible approaches.
IREC contributed to the development and characterisation of novel wide-bandgap PV materials and devices based on Sb(S,Se)I and (Zn,Mg)(O,S,Se), as well as to strategies to reduce their visual impact and improve their integration. In collaboration with the Center for Physical Sciences and Technology (FTMC) and the University of Luxembourg, the SEMS department at IREC developed the visually transparent photovoltaic devices achieving record open-circuit voltages with a colour rendering index of over 98% and an apparent visual transparency of over 70%. The team also developed devices that doubled performance under indoor illumination, reaching 14% power conversion efficiency (PCE), and successfully transferred these record-performing cells to flexible polymeric substrates.
In addition, the Energy System Analytics Department carried out a life cycle assessment (LCA) of the materials and processes developed, assessing their environmental impact and identifying strategies to optimise future industrial-scale production. The analysis indicated that, under scale-up scenarios, these photovoltaic cells could offer environmental benefits compared with non-rechargeable batteries for indoor sensor applications.
Overall, the results provide a basis for the further development and scale-up of photovoltaic solutions with reduced visual impact and greater flexibility of integration, opening opportunities in areas such as IoT, indoor sensors, buildings, vehicles, urban environments, and agrivoltaics.
Based on information from the official source: IREC - Institut de Recerca en Energia de Catalunya (17/11/2026)